Eaton Logo

Technical Support and Service for Eaton Global Hose Assembly Solutions Program
Eaton Global Hose Assembly Equipment



Product Information:


 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 


Software Updates for FT1380e Crimp Machine

For current software updates for the FT1380e Crimp Machine. Please follow the instructions below for downloading the files.

Eaton_Ft1380e_Electronic_Crimp_Machine

The software revision of the HMI and PLC for your FT1380e crimp machine can be found on the Maintenance screen Eaton_ft1380e_Maintenance_screen

Download Instructions for HMI Updates:
  1. Click the link below to download the zip file with the updates.
  2. After downloading the file contents, copy the contents to an empty USB drive maintaining the exact file structure.
  3. For your convenience, a USB drive was provided with the machine.
  4. Prior to using a USB drive, remove all files from the drive and then copy the contents from the download to the drive maintaining the exact file structure.
  5. To install the updates on the machine, turn on the machine, wait for the program to boot up, and then insert the drive in the USB port on the right side of the machine.
  6. A utility will automatically run and then prompt you to Backup, Restore, or Exit.
  7. To install the new updates and retain your favorites, first back up the files and then back up your favorites.
  8. Next, Restore all factory files (Factory Reset - Restore all original Eaton FT1380e files) and then restore your favorites,
  9. Select Exit to close the utility.
  10. For further details and instructions on this process, please refer to the FT1380e machine operator's manual.
FT1380e HMI software update (HMI Revision 2.003)
Last update: January 29, 2021

Download Instructions for PLC Updates:

  1. In the event a PLC update is required, a micro-SD memory card (SD or SDHC) with a capacity of 128 MB to 32 GB is required.
  2. Click the link below to download the zip file with the updates.
  3. After downloading the file contents, copy the contents to an empty micro-SD memory card (SD or SDHC).
  4. With the machine turned off, open the electrical box and locate the PLC.
  5. Open the drawer on the left side of the PLC and insert the micro-SD card.
  6. Close the SD card drawer.
  7. Turn on the machine, updates will install automatically.
  8. After updates complete, turn off the machine.
  9. Remove the micro-SD card from the PLC and close the electrical box.
  10. Proceed with the HMI update using the provided USB as described above.
FT1380e PLC software update (PLC Revision 2.002)
Last update: January 29, 2021

EatonĀ®
Products:

Aeroquip Hose

 

Contact Us Via Email:

Tech Support

Parts Order

Distributor Locator