Crimp Specification Updates for ET5040 - ET5050 Crimp Machines

Current crimp specifications for the ET5040 and ET5050 Industrial Crimp machines are available for download by clicking the link below.

Download Instructions:

Click the link below to down load the zip file with the updates. After downloading zip file, right click on the file and select "Extract All". Save "Parts" folder onto a "Fat32" formatted USB Flash Drive. To install updates, please refer to machines operators manual for instructions.

crimp specifications updates

Last update: September 22, 2021

USB Flash Drive Formatting Instructions:

1. A flash drive formatted to “FAT32” file system is be required for software updates.
2. If you are not sure if your flash drive if formatted properly.
3. Connect your USB - flash drive to your computer.
4. Go to “My Computer” or “File Explorer”, right click on the drive that the USB - Flash Drive appears.
5. From the menu, click “Format”
6. In the "FORMAT device name (drive letter)" window, under "File system," click the drop-down arrow and select FAT32 and then click the Start button.
7. You will see a “Warning: Formatting will erase ALL data on this disk/drive. To format the disk, click ok. To quit, click CANCEL”.
8. Upon completion, you will receive a “Format Complete” message. Click “OK”.
9. Click the “Close” button.
10. Close “My Computer” or Windows Explorer” window.
11. To install updates, please refer to machines operators manual for instructions.